|
|
 |
|
 |
| |
Card Reader
Internal design fitting into 3.5" drive bay
to save the desktop space
Four sockets support SD/MMC, memory stick, 3.3V
smart media, type I/II compact flash, and IBM microdrive
Allow data exchange in different sockets
Supports Hot-Swapping and Plug & Play function
USB bus powered; no external power required
Supports mass storage class drive; no additional
device driver needed under Windows Me/XP |
|
Power Supply
Input
Power volt range: 90-135Vac / 180-265Vac, switch
selected, single phase
Frequency range: 47-63Hz
Output
(+12V, +5V, +3.3V) maximum tatal output 190W
Maximum output 200W
Instant maximum output 230W |
|
| AC
input |
90-135Vac |
| DC
output |
+3.3Vdc |
+5Vdc |
+12Vdc |
-5Vdc |
-12Vdc |
+5Vsb |
| MAX.A |
9.0A |
25.0A |
13.0A |
0.01A |
0.3A |
2.0A |
Total output power
of +12V, +5V and +3.3V shall be less than
190W
Maximum DC output power shall be less than
200W |
|
| |
|
Model |
S-Buddie |
|
|
Case |
Dimension |
415(L) x 330(W) x 90(H) mm |
| Bay |
5.25 inch Bay x 1, 3.5 inch Bay x 1 |
| Bottom |
Power bottom x 1, Reset bottom x 1 |
| LED |
Power LED x 1, HDD LED x 1 |
Connector
(Front side) |
USB x 1, IEEE 1394 x 1, Mic. x 1, Earphone
x 1 |
Connector
(Back side) |
Low profile brackets x 4, without I/O shield |
|
|
Power |
Model |
LPF-200CP |
| Input |
Power volt range 90-135Vac / 180-265Vac, switch
selected, single phase
Frequency range: 47-63Hz |
| Output |
(+12V, +5V, +3.3V) Maximun total output 190W
Maximum output 200W
Instant maximum output 230W |
|
|
6 in 1 internal
Card Reader |
Model |
UCR-61S1 |
| Transfer
rate |
USB 1.1 specification, up to 12Mb/sec |
| Sockets |
Supports CF1/CF2/MD; SD/MMC; MS type flash
card |
| Interface |
Internal USB 1.1 specification
DC +5.0V from USB port directly |
| Dimension |
124(L) x 101(W) x 26(H) mm |
|
 |
 |
ECS
L4S5MG3 (SiS 650GL & SiS 962L chipset)
 |
ECS
L7VMM2 (VIA KM266 & VT8235 chipset)
 |
|
